| Weight | 2.7 KG / psc. |
| Commodity number | |
| Country of origin | |
| Dimensions (WxHxD) | |
| EAN code | |
| Product group | |
| Model | FD-G50L |
| NPS (Nominal Pipe Size) | 1 1/4", 1 1/2", 2" |
| Outer diameter of pipe | ø41 to 45 mm 1.61" to 1.77" , ø47 to 51 mm 1.85" to 2.01" , ø58 to 62 mm 2.28" to 2.44" |
| Pipe thickness | 1.65 to 3.5 mm 0.06" to 0.138" |
| Supported pipe materials | Iron, steel, stainless steel |
| Supported fluids | Air, Nitrogen, other gases *1 |
| Fluid temperature | 0 to 60ºC 32 to 140 °F |
| Recommended pressure | 0.4 MPa or greater (58 PSI or greater) |
| Rated velocity of flow range | Up to 15 m/s |
| L/min | Pipe size 32 A: 900.0 Pipe size 40 A: 1200.0 Pipe size 50 A: 2000.0 |
| CFM | Pipe size 32 A: 32.00 Pipe size 40 A: 42.00 Pipe size 50 A: 70.00 |
| 20°C 68°F 80 psi 055 MPa | Pipe size 32 A: 192.17 Pipe size 40 A: 252.22 Pipe size 50 A: 420.37 |
| 20°C 68°F 100 psi 069 MPa | Pipe size 32 A: 232.76 Pipe size 40 A: 305.49 Pipe size 50 A: 509.16 |
| 20°C 68°F 120 psi 083 MPa | Pipe size 32 A: 273.35 Pipe size 40 A: 358.77 Pipe size 50 A: 597.95 |
| Display | QVGA 2.2" LCD color monitor |
| Display update cycle | Approx. 3 Hz |
| Consumption/leakage amount | 0.01 m 3 , 1 L, 0.1 CF |
| Response time | 1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable) |
| Between 1 and 10% of FS | ±1.0% of F.S. *2 *3 *4 *5 |
| Zero point error | ±0.15% of F.S. *2 *6 |
| Static leakage repeatability | ±1.0% of RD *4 *7 |
| Hysteresis | Variable |
| Flow units | CFM(S), CFM, m 3 /h (N), m 3 /h (S), m 3 /h, L/min (N), L/min (S), L/min |
| I/O wiring connection port | M12 4-pin connector (male) |
| ch2 | Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input *8 |
| Analog output (ch2) | 4 to 20 mA/0 to 20 mA, load resistance: 500 Ω or less |
| External input (ch2) | Short-circuit current: 1.5 mA or less, input time: 20 ms or more |
| Protection circuit | Power supply reverse connection protection, power supply surge protection, short-circuit protection for each output, surge protection for each output |
| Analog input (for volume conversion) | M8 4-pin connector (female), analog current input (4 to 20 mA), input resistance: 100Ω or less |
| Power supplied to pressure sensor | Supply voltage: Equivalent to voltage applied to the FD-G, Supply current:70 mA or less (analog output of the pressure sensor included) |
| Transmission rate | 100 Mbps |
| Cable | Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable |
| Connector | M12 connector (female, D-code) |
| Network function | Modbus TCP, EtherNet/IP™, IO-Link *9 |
| Events | 100 |
| Power consumption | 350 mA or less at 20 V, 290 mA or less at 24 V, 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 550 mA or less at 20 V, 490 mA or less at 24 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded) |
| Ambient temperature | Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing) |
| Relative humidity | 5 to 85%RH (no condensation) |
| Vibration resistance | 10 to 500 Hz, power spectral density: 0.816 G 2 /Hz, XYZ axes |
| Shock resistance | 100 m/s 2 , 16 ms pulse, XYZ axes, 1000 times for each axis |
| Detection head | Body: PPS/SUS304, rear surface: rubber |
| Mounting/damping bracket | SUS304 |
| DN (Diameter Nominal) | 32 A, 40 A, 50 A |
| m 3 /h | Pipe size 32 A: 54.00 Pipe size 40 A: 72.00 Pipe size 50 A: 120.00 |
| 20°C 68°F 60 psi 041 MPa | Pipe size 32 A: 151.58 Pipe size 40 A: 198.95 Pipe size 50 A: 331.58 |
| Instantaneous flow rate | 0.01 m 3 /h, 0.1 L/min, 0.01 CFM |
| Between 10 and 100% of FS | ±2.0% of RD *2 *3 *4 *5 |
| ch1 | Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump) *8 |
| Control output (ch1/ch2) | NPN/PNP setting switchable, open collector output 30 VDC or less, max. 100 mA/ch, residual voltage: 2.5 V or less |
| USB | USB 2.0 |
| Standard | IEEE 802.3u (100BASE-TX) |
| Consumption amount/ leakage amount | Approx. 5 years |
| Power voltage | 20 to 30 VDC including 10% ripple (P-P), Class 2 |
| Enclosure rating | IP65/67 (IEC 60529) *10 |
| Display unit | Body: PBT + coating, display: PMMA, Power supply port: SUS304-equivalent, Ethernet port: zinc nickel plating |
