This module (Item No. 750-1665/000-004) has 8 power outputs (O1+ ... O8+). The power outputs switch resistive, capacitive, and inductive loads in accordance with DC-13 at a rated current of up to 0.5 A without requiring external circuitry. The power outputs can be operated in unipolar mode (with a common potential on one side of the load). Short circuit and 24 V power supply are monitored. The PROFIsafe address is set using the side-mounted coding switch, WAGO-I/O-CHECK, or the engineering tool of the safety controller. The module supports PROFIsafe protocols V2.4 and V2.6 (PROFIBUS and PROFINET). Field and system levels are electrically isolated. Individual safety modules can be arranged in any combination when configuring the fieldbus node. If required (e.g., if the 24 V supply line exceeds 3 m in length), a WAGO filter module or a suitable external filter must be used to protect the 24 V supply against surge and burst in accordance with EN 61000-6-7, EN 61326-3-1, and marine requirements. Additional information can be found in the product manual (available in German and English)! The module (Item No. 75x-1665/000-004) was evaluated by UL to UL/CSA 61010-1, UL/CSA 61010-2-201, UL 121201, and CSA-C22.2 No. 213. The functional safety evaluation was performed by TÜV Rheinland in compliance with the specified standards.
