CompareProductAvailability / Price
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-657
750-657
Part number #: 750-657
Increasingly complex products, manufacturing flexibility and high demands on quality assurance require intelligent, configurable and programmable sensors. To fulfill these demands, IO-Link streamlines the varying interfaces required to connect to a control system and tooling. A 3-wire connection can communicate process data (as single bits, bytes and data blocks for input and output data). It also communicates acyclic data (for identification, configuration, parameterization and diagnostics) with up to 230.4 kBaud to both sensors and actuators. The functions and performance data are defined in device description files for master and devices; these are easy to customize via WAGO-I/O-CHECK. If a device must be replaced, the configuration and parameterization can be automatically restored without maintenance personnel. Project design, installation and operation are simplified! Four different IO-Link devices or standard digital sensors/actuators can simultaneously connect to the WAGO 750-657 IO-Link Master. At just 12 mm (0.47 inch) wide, the module has three connections for each of the four channels.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-660/000-001
750-660/000-001
Part number #: 750-660/000-001
Fail-safe 8-channel digital input; 24 VDC; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-661/000-003
750-661/000-003
Part number #: 750-661/000-003
This PROFIsafe Module (75x-661/000-003) connects to potential-free emergency stop buttons with contacts, safety interlock switches, operating mode switches, safety sensors and semiconductor outputs. The module features four clock-sensitive inputs (I1 … I4) that are fed via two differently clocked outputs (T1 … T2). Clock outputs are short-circuit-protected. Inputs are continually monitored for cross circuits and power supply from separate sources. Additional safety-relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O- CHECK . The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch located on the side of the module, or via WAGO-I/O- CHECK . The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols. Field and system levels are electrically isolated. Individual modules can be arranged in any combination when configuring the fieldbus node. To protect the module against impulse voltages (over-voltage protection per IEC 61000-4-5), a WAGO Filter Module or an external surge filter must be used for the 24V supply voltage. Additional information can be found in the product manual (available in German and English).
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-661/000-004
750-661/000-004
Part number #: 750-661/000-004
Fail-safe 4-channel digital input; 24 VDC; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-662/000-003
750-662/000-003
Part number #: 750-662/000-003
This PROFIsafe Module (75x-662/000-003) connects to potential-free emergency stop buttons with contacts, safety interlock switches, operating mode switches, safety sensors and semiconductor outputs. The module features eight clock-sensitive inputs (I1 … I8) that are fed via two differently clocked outputs (T1 … T2). Clock outputs are short-circuit-protected. Inputs are continually monitored for cross circuits and power supply from separate sources. Additional safety-relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O- CHECK . The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch located on the side of the module, or via WAGO-I/O- CHECK . The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols. Field and system levels are electrically isolated. Safety modules can be arranged in any combination when configuring the fieldbus node. To protect the module against impulse voltages (over-voltage protection per IEC 61000-4-5), a WAGO Filter Module or an external surge filter must be used for the 24V supply voltage. Additional information can be found in the product manual (available in German and English).
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-662/000-004
750-662/000-004
Part number #: 750-662/000-004
Fail-safe 8-channel digital input; 24 VDC; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-663/000-003
750-663/000-003
Part number #: 750-663/000-003
Intrinsically safe 4-channel digital input; 24 VDC; PROFIsafe V2.0 iPar
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-665/000-001
750-665/000-001
Part number #: 750-665/000-001
Fail-safe 4/4 channel digital input/output; 24 VDC; 0.5 A; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-666/000-003
750-666/000-003
Part number #: 750-666/000-003
The 75x-666/000-003 Module is equipped with two power outputs (O1 … O2) and four clock sensitive inputs (I1 … I4). The sensors can be supplied directly with 24 V, or fed by two differently clocked outputs (T1 … T2). The inputs connect potential-free, emergency-off switches with contacts, safety interlock switches, mode selectors, as well as both safety sensors and semiconductor outputs (e.g., light barriers, PLC outputs). The power outputs switch both DC13 resistive and inductive loads with up to a 2A-rated current without requiring any additional external circuit. The power outputs operate in both bipolar (high-side/low-side switching) and unipolar (common potential on one side of the load) modes. The module monitors short circuits, cross circuits and 24 V power supply from separate sources. Both the monitoring and additional safety-relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O-CHECK. The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch on the side of the module, or via WAGO-I/O-CHECK. The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols. Individual input modules can be arranged in any combination when configuring the fieldbus node. To protect the module against impulse voltages (over-voltage protection per IEC 61000-4-5), the 750-626 Filter Module or an external surge filter must be used for the 24 V supply voltage. Additional information can be found in the product manual (available in German and English).
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-667/000-003
750-667/000-003
Part number #: 750-667/000-003
The 75x-667/000-003 Module is equipped with four power outputs (O1 … O4) and four clock sensitive inputs (I1 … I4). The sensors can be supplied directly with 24 V, or fed by two differently clocked outputs (T1 … T2). The inputs connect potential-free, emergency-off switches with contacts, safety interlock switches, mode selectors, as well as both safety sensors and semiconductor outputs (e.g., light barriers, PLC outputs). The power outputs switch both DC13 resistive and inductive loads with up to a 2A-rated current without requiring any additional external circuit. The power outputs operate in both bipolar (high-side/low-side switching) and unipolar (common potential on one side of the load) modes. The module monitors short circuits, cross circuits and 24 V power supply from separate sources. Both the monitoring and additional safety-relevant parameters (e.g., operating modes, switching off test pulses, discrepancy or filter times) can be configured via WAGO-I/O- CHECK . The configuration tool can be conveniently integrated into engineering systems supporting both CC2 and CC3 tool calling interfaces (TCI). When exchanging modules, parameters are automatically downloaded into the control unit via PROFIsafe-compatible iPar server – depending on settings. The PROFIsafe address can be set using the DIP switch on the side of the module, or via WAGO-I/O- CHECK . The module supports both PROFIsafe V1 (PROFIBUS) and V2 (PROFIBUS, PROFINET) protocols. Safety modules can be arranged in any combination when configuring the fieldbus node. To protect the module against impulse voltages (over-voltage protection per IEC 61000-4-5), a WAGO Filter Module or an external surge filter must be used for the 24V supply voltage. Additional information can be found in the product manual (available in German and English).
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-667/000-004
750-667/000-004
Part number #: 750-667/000-004
Fail-safe 4/4 channel digital input/output; 24 VDC; 2 A; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-668/000-004
750-668/000-004
Part number #: 750-668/000-004
Fail-safe 4 channel analog input; 0/4 … 20 mA; Differential input; PROFIsafe
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
WAGO
750-669/000-003
750-669/000-003
Part number #: 750-669/000-003
Fail-safe 4/4 channel digital input/relay output; 48 VAC/ 60 VDC; 6 A; PROFIsafe V2.0 iPar
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- I/O Systems
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- PLCs – Controllers
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- PLCs – Controllers
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- PLCs – Controllers
WAGO
750-8101/000-010
750-8101/000-010
Part number #: 750-8101/000-010
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
WAGO
750-8101/025-000
750-8101/025-000
Part number #: 750-8101/025-000
Controller PFC100; 2 x ETHERNET; Ext. Temperature
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
- Automation Technology
- PLCs – Controllers