CompareProductAvailability / Price
up to 5 items.
2721-1106/037-000
WAGO
2721-1106/037-000
Part number #: 2721-1106/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 6-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2721-1107/037-000
WAGO
2721-1107/037-000
Part number #: 2721-1107/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 7-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2721-1108/037-000
WAGO
2721-1108/037-000
Part number #: 2721-1108/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 8-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2721-1110/037-000
WAGO
2721-1110/037-000
Part number #: 2721-1110/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 10-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2721-1112/037-000
WAGO
2721-1112/037-000
Part number #: 2721-1112/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 12-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 25
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2721-1116/037-000
WAGO
2721-1116/037-000
Part number #: 2721-1116/037-000
1-conductor female connector; lever; Push-in CAGE CLAMP®; 2.5 mm²; Pin spacing 5 mm; 16-pole; 100% protected against mismating, coding finger; Lateral locking levers; 2,50 mm²; light gray
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 25
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
272-131/201-000
WAGO
Part number #: 272-131/201-000
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1000
up to 5 items.
2734-1102/327-047
WAGO
Part number #: 2734-1102/327-047
Female connector, 2734 Series, light gray Easy electrical installations are guaranteed with this female connector (item number 2734-1102/327-047). Conductors can only be connected to this female connector if their strip length is between 9 and 10 mm . Featuring one conductor terminal along with Push-in CAGE CLAMP®, this connector outperforms the competition. Push-in CAGE CLAMP® connection technology is ideal for connecting all conductor types. Solid and fine-stranded conductors with ferrules can be plugged in without the need for tools—all thanks to its pluggable design. Dimensions: (9.4 x 10 x 24.6) mm (width x height x depth). Depending on the conductor type, this female connector is ideal for conductor cross sections ranging from 0.14 mm² to 1.5 mm². Tin is used for coating the contact surfaces.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 200
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2734-1106/327-000/010-000
WAGO
Part number #: 2734-1106/327-000/010-000
Female connector, 2734 Series, lever This female connector (item number 2734-1106/327-000/010-000) simplifies electrical installations. Strip lengths must be between 9 and 10 mm when connecting conductors to this female connector. This product features one conductor terminal and utilizes Push-in CAGE CLAMP®. Push-in CAGE CLAMP® technology provides a universal connection solution for all conductor types. It allows both solid and fine-stranded conductors with ferrules to be inserted directly into the clamping point without the need for tools. Dimensions: (23.4 x 9.95 x 24.6) mm (width x height x depth). Depending on the conductor type, this female connector is ideal for conductor cross sections ranging from 0.14 mm² to 1.5 mm². Tin is used for coating the contact surfaces.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 100
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2734-1112/329-000
WAGO
Part number #: 2734-1112/329-000
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
up to 5 items.
2734-1116/329-000
WAGO
Part number #: 2734-1116/329-000
Female connector, 2734 Series, Push-in CAGE CLAMP® This female connector (item number 2734-1116/329-000) simplifies electrical installations. Strip lengths must be between 9 and 10 mm when connecting conductors to this female connector. This product features one conductor terminal and utilizes Push-in CAGE CLAMP®. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, offering a key advantage: It allows direct insertion of both solid and fine-stranded conductors with ferrules without needing tools. No preparation is required; for example, crimping the conductor's ferrule is not necessary. Depending on the conductor type, this female connector is suitable for conductor cross sections ranging from 0.14 mm² to 1.5 mm². The contact surface is coated with tin.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 25
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2734-1516/310-000
WAGO
Part number #: 2734-1516/310-000
Female connector, 2734 Series, 0 ° conductor exit to connection direction Enjoy convenient electrical installations with this female connector (item number 2734-1516/310-000). Strip lengths must be between 9 and 10 mm when connecting conductors to this female connector. This product features one conductor terminal and utilizes Push-in CAGE CLAMP®. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, featuring a winning design: both solid and fine-stranded conductors with ferrules can be directly inserted without the need for tools or any preparation, such as crimping the ferrule. The dimensions are (58.4 x 21 x 24.6) mm (width x height x depth). Depending on the conductor type, this female connector is ideal for conductor cross sections ranging from 0.14 mm² to 1.5 mm². Tin is used for coating the contact surfaces.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 25
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2734-510
WAGO
Part number #: 2734-510
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 50
  • Electrical Interconnections
  • Pluggable Connectors
up to 5 items.
2759-205/260-1000
WAGO
Part number #: 2759-205/260-1000
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
up to 5 items.
2759-249/210-1000
WAGO
Part number #: 2759-249/210-1000
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
up to 5 items.
2759-249/211-1000
WAGO
Part number #: 2759-249/211-1000
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2760-1031/1000-3100
WAGO
Part number #: 2760-1031/1000-3100
WAGO Monitoring Solutions (WMS) is an energy monitoring system designed for the visualization of measured values. This application allows customers to identify cost-saving opportunities by providing a better overview of their system or property consumption data. After pre-processing the data on the controller (e.g., via EDM), the data can be further processed on a WAGO server or within the customer's server environment. Main features: Measuring, monitoring, and reporting for your energy consumption Handling of supplementary measurements: digital meters, temperature measurements, and other project-specific expansions can be integrated. Investigation of correlations between different energy types/plans Different locations, location hierarchy Virtual groups (for tenant billing, ISO50001, carbon footprint, etc.)
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2760-1031/1000-3200
WAGO
Part number #: 2760-1031/1000-3200
WAGO Monitoring Solutions (WMS) is an energy monitoring system designed for the visualization of measured values. This application allows customers to identify cost-saving opportunities by providing a better overview of their system or property consumption data. After pre-processing the data on the controller (e.g., via EDM), the data can be further processed on a WAGO server or within the customer's server environment. Main features: Measuring, monitoring, and reporting for your energy consumption Handling of supplementary measurements: digital meters, temperature measurements, and other project-specific expansions can be integrated. Investigation of correlations between different energy types/plans Different locations, location hierarchy Virtual groups (for tenant billing, ISO50001, carbon footprint, etc.)
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2760-1031/2000-3100
WAGO
Part number #: 2760-1031/2000-3100
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
up to 5 items.
2760-1031/2000-3200
WAGO
Part number #: 2760-1031/2000-3200
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
up to 5 items.
2762-2006/211-1000
WAGO
Part number #: 2762-2006/211-1000
This application-based license is specifically designed for use with CODESYS Virtual Control for Linux SL. It includes 512 I/O channels and supports an application size of up to 3 MB. Suitable hardware platforms include WAGO Edge Computers (Order No.: 752-9400; 752-9401; 752-9800; 752-9412; 752-9813). These licenses are hardware-independent and can be used across multiple products, offering maximum flexibility when selecting devices. Another advantage is the scaling of licenses based on application metrics, meaning you only pay for the CODESYS features you actually use. Overview of application metrics for determining the appropriate license: Standard S EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 4 instances Number of input/output channels: 512 Code size: 3 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard M EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 8 instances Number of input/output channels: 1024 Code size: 5 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard L EtherCAT/Profinet/EthernetIP: 2 instances CANopen/Profibus/Modbus/J1939: 10 instances Number of input/output channels: 4096 Code size: 6 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Core assignment of IEC task groups Visualization S: License for target and web visualization with up to 128 tags Management Communication S: OPC UA license for client and server with up to 512 tags Licensing Single Device License: The license can be used on the controller where the CODESYS runtime system is installed. The license is activated in a software-based container (soft container) that is permanently bound to the controller. Note: Without a license, the software will run in demo mode for two hours. After that, a manual restart is required. Please note that the use of these application-based licenses requires CODESYS Development System V3.5.19.7 or higher and CODESYS Virtual Control SL Runtime Software Version 4.12.0.0 or higher. Source: The required software can be obtained from the WAGO Download Center: CODESYS: https://downloadcenter.wago.com/latest-of-productgroup/codesys Runtime: https://downloadcenter.wago.com/software/latest/runtime-codesys-virtual-control-linux Demo Mode A controller without a license runs in demo mode for two hours. After this period, the runtime system will shut down and must be restarted manually. The functionality of demo mode is not restricted, but unlicensed functions have a shorter demo runtime (e.g., fieldbuses operate for 30 minutes). License Check When an application-based license is available on the controller, all criteria are checked against the limit stored in the license. If any criteria exceed the defined limit, the application download or boot application loading will be blocked. No transition to demo mode occurs. This prevents the system from reverting to a time-limited demo mode during production.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2762-2007/211-1000
WAGO
Part number #: 2762-2007/211-1000
This application-based license is specifically designed for use with CODESYS Virtual Control for Linux SL. It includes 1024 I/O channels and supports an application size of up to 5 MB. Suitable hardware platforms include WAGO Edge Computers (Order No.: 752-9400; 752-9401; 752-9800; 752-9412; 752-9813). These licenses are hardware-independent and can be used across multiple products, offering maximum flexibility when selecting devices. Another advantage is the scaling of licenses based on application metrics, meaning you only pay for the CODESYS features you actually use. Overview of application metrics for determining the appropriate license: Standard S EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 4 instances Number of input/output channels: 512 Code size: 3 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard M EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 8 instances Number of input/output channels: 1024 Code size: 5 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard L EtherCAT/Profinet/EthernetIP: 2 instances CANopen/Profibus/Modbus/J1939: 10 instances Number of input/output channels: 4096 Code size: 6 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Core assignment of IEC task groups Visualization S: License for target and web visualization with up to 128 tags Management Communication S: OPC UA license for client and server with up to 512 tags Licensing Single Device License: The license can be used on the controller where the CODESYS runtime system is installed. The license is activated in a software-based container (soft container) that is permanently bound to the controller. Note: Without a license, the software will run in demo mode for two hours. After that, a manual restart is required. Please note that the use of these application-based licenses requires CODESYS Development System V3.5.19.7 or higher and CODESYS Virtual Control SL Runtime Software Version 4.12.0.0 or higher. Source: The required software can be obtained from the WAGO Download Center: CODESYS: https://downloadcenter.wago.com/latest-of-productgroup/codesys Runtime: https://downloadcenter.wago.com/software/latest/runtime-codesys-virtual-control-linux Demo Mode A controller without a license runs in demo mode for two hours. After this period, the runtime system will shut down and must be restarted manually. The functionality of demo mode is not restricted, but unlicensed functions have a shorter demo runtime (e.g., fieldbuses operate for 30 minutes). License Check When an application-based license is available on the controller, all criteria are checked against the limit stored in the license. If any criteria exceed the defined limit, the application download or boot application loading will be blocked. No transition to demo mode occurs. This prevents the system from reverting to a time-limited demo mode during production.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2762-2008/211-1000
WAGO
Part number #: 2762-2008/211-1000
This application-based license is specifically designed for use with CODESYS Virtual Control for Linux SL. It includes 2048 I/O channels and supports an application size of up to 6 MB. Suitable hardware platforms include WAGO Edge Computers (Order No.: 752-9400; 752-9401; 752-9800; 752-9412; 752-9813). These licenses are hardware-independent and can be used across multiple products, offering maximum flexibility when selecting devices. Another advantage is the scaling of licenses based on application metrics, meaning you only pay for the CODESYS features you actually use. Overview of application metrics for determining the appropriate license: Standard S EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 4 instances Number of input/output channels: 512 Code size: 3 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard M EtherCAT/Profinet/EthernetIP: 1 instance CANopen/Profibus/Modbus/J1939: 8 instances Number of input/output channels: 1024 Code size: 5 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Standard L EtherCAT/Profinet/EthernetIP: 2 instances CANopen/Profibus/Modbus/J1939: 10 instances Number of input/output channels: 4096 Code size: 6 MB incl. visualization S incl. Management Communication S (e.g., OPC UA) Reloadable C code Core assignment of IEC task groups Visualization S: License for target and web visualization with up to 128 tags Management Communication S: OPC UA license for client and server with up to 512 tags Licensing Single Device License: The license can be used on the controller where the CODESYS runtime system is installed. The license is activated in a software-based container (soft container) that is permanently bound to the controller. Note: Without a license, the software will run in demo mode for two hours. After that, a manual restart is required. Please note that the use of these application-based licenses requires CODESYS Development System V3.5.19.7 or higher and CODESYS Virtual Control SL Runtime Software Version 4.12.0.0 or higher. Source: The required software can be obtained from the WAGO Download Center: CODESYS: https://downloadcenter.wago.com/latest-of-productgroup/codesys Runtime: https://downloadcenter.wago.com/software/latest/runtime-codesys-virtual-control-linux Demo Mode A controller without a license runs in demo mode for two hours. After this period, the runtime system will shut down and must be restarted manually. The functionality of demo mode is not restricted, but unlicensed functions have a shorter demo runtime (e.g., fieldbuses operate for 30 minutes). License Check When an application-based license is available on the controller, all criteria are checked against the limit stored in the license. If any criteria exceed the defined limit, the application download or boot application loading will be blocked. No transition to demo mode occurs. This prevents the system from reverting to a time-limited demo mode during production.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2762-2102/211-1000
WAGO
Part number #: 2762-2102/211-1000
This application-based license is specifically designed for use with CODESYS Virtual Control for Linux SL. It enables communication at the management level – for example, between controllers, HMIs, or SCADA systems – via various technologies such as OPC UA. The required license size depends on the number of data points (communication tags) used. When using OPC UA, two options are available: Symbol configuration – Based on an existing application, symbols to be accessed can be easily selected. OPC UA information models – These are generically supported. Their contents are translated into corresponding IEC data types and declarations. Data reception is handled via data sources. The source can be another CODESYS application or any OPC UA server. Metric: Number of communication tags Communication tags are counted based on variables from the following configurations: Communication Manager Symbol Configuration Data Sources (Data Source Manager) Variables with basic data types (e.g., BOOL, INT, REAL) are counted individually. For arrays, each index counts as one tag; for structures, each variable within the structure is counted. The M-size license allows the exchange of up to 4096 data points. This license is not required for classic fieldbus communication (IO tags). Licensing Single Device License: The license can be used on the controller where the CODESYS runtime system is installed. The license is activated in a software-based container (soft container) that is permanently bound to the controller. Note: Without a license, the software will run in demo mode for two hours. After that, a manual restart is required. Please note that the use of these application-based licenses requires CODESYS Development System V3.5.19.7 or higher and CODESYS Virtual Control SL Runtime Software Version 4.12.0.0 or higher. Source: The required software can be obtained from the WAGO Download Center: CODESYS: https://downloadcenter.wago.com/latest-of-productgroup/codesys Runtime: https://downloadcenter.wago.com/software/latest/runtime-codesys-virtual-control-linux Demo Mode A controller without a license runs in demo mode for two hours. After this period, the runtime system will shut down and must be restarted manually. The functionality of demo mode is not restricted, but unlicensed functions have a shorter demo runtime (e.g., fieldbuses operate for 30 minutes). License Check When an application-based license is available on the controller, all criteria are checked against the limit stored in the license. If any criteria exceed the defined limit, the application download or boot application loading will be blocked. No transition to demo mode occurs. This prevents the system from reverting to a time-limited demo mode during production.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
up to 5 items.
2762-2105/211-1000
WAGO
Part number #: 2762-2105/211-1000
This application-based license is specifically designed for use with CODESYS Virtual Control for Linux SL. It enables communication at the management level – for example, between controllers, HMIs, or SCADA systems – via various technologies such as OPC UA. The required license size depends on the number of data points (communication tags) used. When using OPC UA, two options are available: Symbol configuration – Based on an existing application, symbols to be accessed can be easily selected. OPC UA information models – These are generically supported. Their contents are translated into corresponding IEC data types and declarations. Data reception is handled via data sources. The source can be another CODESYS application or any OPC UA server. Metric: Number of communication tags Communication tags are counted based on variables from the following configurations: Communication Manager Symbol Configuration Data Sources (Data Source Manager) Variables with basic data types (e.g., BOOL, INT, REAL) are counted individually. For arrays, each index counts as one tag; for structures, each variable within the structure is counted. The XXL-size license permits the exchange of an unlimited number of data points. This license is not required for classic fieldbus communication (IO tags). Licensing Single Device License: The license can be used on the controller where the CODESYS runtime system is installed. The license is activated in a software-based container (soft container) that is permanently bound to the controller. Note: Without a license, the software will run in demo mode for two hours. After that, a manual restart is required. Please note that the use of these application-based licenses requires CODESYS Development System V3.5.19.7 or higher and CODESYS Virtual Control SL Runtime Software Version 4.12.0.0 or higher. Source: The required software can be obtained from the WAGO Download Center: CODESYS: https://downloadcenter.wago.com/latest-of-productgroup/codesys Runtime: https://downloadcenter.wago.com/software/latest/runtime-codesys-virtual-control-linux Demo Mode A controller without a license runs in demo mode for two hours. After this period, the runtime system will shut down and must be restarted manually. The functionality of demo mode is not restricted, but unlicensed functions have a shorter demo runtime (e.g., fieldbuses operate for 30 minutes). License Check When an application-based license is available on the controller, all criteria are checked against the limit stored in the license. If any criteria exceed the defined limit, the application download or boot application loading will be blocked. No transition to demo mode occurs. This prevents the system from reverting to a time-limited demo mode during production.
Price: Please send request
Request Lead Time: app. 1 Day
Delivery Time: app. 2-4 Weeks
Estimated delivery time to our warehouse in Berlin
Delivery Terms: FCA Berlin
individually for each client according to INCOM TERMS 2025
Multiples Of: 1
  • Automation Technology
  • Software
Showing 25 out of 41237 results
Page 1587 of 1650